net: wangxun: timeout and error

It is about adding the Tx timeout process and pci_error_handlers.
When a PCIe error occurs, the txgbe device is able to recover on platform
that support AER interrupt. And for Tx timeout, the txgbe driver can
recover the device by reset process.

For ngbe devices, due to the absence of the current function, it cannot
br fully recovered once there is a PCIe error or Tx timeout. Its
function will be completed in the future.

Changes log:
v7:
- Move ptp_clock_unregister() to be executed before free wx->ptp_tx_skb.

v6: https://lore.kernel.org/all/20260610060917.23980-1-jiawen...
- Move the check of device status inside wx_soft_quiesce().
- Reverse the error return of txgbe_disable_device().
- Add PCIe error check in tx_timeout.
- Add WX_STATE_RES_FREED flag to avoid double-free of resources.

v5: https://lore.kernel.org/all/20260604085631.12720-1-jiawen...
- Avoid the same name on two functions.
- Encode the device identity into the name of reset work queue.
- Change pr_err() to wx_err().
- Check WX_STATE_DOWN and WX_STATE_RESETTING at the entry of every work item.
- Implement wx_ptp_quiesce().
- Add netif_carrier_off() and netif_tx_disable() in soft_quiesce.
- Move resource free operations after PCIe recovery.
- Return error code in down path.

v4: https://lore.kernel.org/all/20260601072221.2952-1-jiawenw...
- Create a separate work queue for the reset task.
- Gate wx_watchdog_flush_tx() on netif_running().
- Add rtnl_lock() around wx->do_reset() in wx_io_slot_reset().
- Change .close_suspend() to .soft_quiesce() to avoid MMIO when PCI
  channel is frozen.

v3: https://lore.kernel.org/all/20260509100540.32612-1-jiawen...
- Merge the multiple string line into one in wx_handle_tx_hang().
- Remove the redundant warn messages.
- Use test_and_clear_bit() instead of checking the flag bit then clear it.
- Drop the Tx hang check in tx_timeout.
- Call wx_update_stats() before wx_check_tx_hang().
- Add Tx flush when link lost.
- Move wx_ptp_stop() into wx->close_suspend().
- Drop V2 patch 5/6 because WOL packets are handled before DMA ring.
- Check wx NULL pointer in wx_io_error_detected().
- Check perm failure before hardware teardown.

v2: https://lore.kernel.org/all/20260430082517.19612-1-jiawen...
- Add the missing rtnl_unlock() at early return in wx_reset_subtask().
- Replace ngbe_close() with ngbe_close_suspend() in ngbe_dev_shutdown().
- Add a patch to clear stored DMA addresses.
 
v1: https://lore.kernel.org/r/20260428021156.13564-1-jiawenwu...

Jiawen Wu (5):
  net: ngbe: implement libwx reset ops
  net: wangxun: add Tx timeout process
  net: wangxun: add reinit parameter to wx->do_reset callback
  net: wangxun: implement soft quiesce for PCIe error recovery
  net: wangxun: add pcie error handler

 drivers/net/ethernet/wangxun/libwx/Makefile   |   2 +-
 drivers/net/ethernet/wangxun/libwx/wx_err.c   | 321 ++++++++++++++++++
 drivers/net/ethernet/wangxun/libwx/wx_err.h   |  18 +
 .../net/ethernet/wangxun/libwx/wx_ethtool.c   |   2 +-
 drivers/net/ethernet/wangxun/libwx/wx_hw.c    |  17 +-
 drivers/net/ethernet/wangxun/libwx/wx_lib.c   |  59 +++-
 drivers/net/ethernet/wangxun/libwx/wx_lib.h   |   1 +
 drivers/net/ethernet/wangxun/libwx/wx_ptp.c   |  21 ++
 drivers/net/ethernet/wangxun/libwx/wx_ptp.h   |   1 +
 drivers/net/ethernet/wangxun/libwx/wx_type.h  |  25 +-
 .../net/ethernet/wangxun/ngbe/ngbe_ethtool.c  |   1 -
 drivers/net/ethernet/wangxun/ngbe/ngbe_main.c |  84 ++++-
 drivers/net/ethernet/wangxun/ngbe/ngbe_type.h |   1 +
 .../net/ethernet/wangxun/txgbe/txgbe_main.c   |  56 ++-
 .../net/ethernet/wangxun/txgbe/txgbe_type.h   |   2 +-
 15 files changed, 592 insertions(+), 19 deletions(-)
 create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_err.c
 create mode 100644 drivers/net/ethernet/wangxun/libwx/wx_err.h

-- 
2.51.0