| From: |
| Biju <biju.das.au-AT-gmail.com> |
| To: |
| Philipp Zabel <p.zabel-AT-pengutronix.de>, Vinod Koul <vkoul-AT-kernel.org>, Rob Herring <robh-AT-kernel.org>, Krzysztof Kozlowski <krzk+dt-AT-kernel.org>, Conor Dooley <conor+dt-AT-kernel.org>, Geert Uytterhoeven <geert+renesas-AT-glider.be>, Michael Turquette <mturquette-AT-baylibre.com>, Stephen Boyd <sboyd-AT-kernel.org>, Liam Girdwood <lgirdwood-AT-gmail.com>, Mark Brown <broonie-AT-kernel.org>, Magnus Damm <magnus.damm-AT-gmail.com> |
| Subject: |
| [PATCH 00/11] Add RZ/G3L USB2.0 host support |
| Date: |
| Fri, 12 Jun 2026 15:30:28 +0100 |
| Message-ID: |
| <20260612143048.317907-1-biju.das.jz@bp.renesas.com> |
| Cc: |
| Biju Das <biju.das.jz-AT-bp.renesas.com>, Neil Armstrong <neil.armstrong-AT-linaro.org>, Yoshihiro Shimoda <yoshihiro.shimoda.uh-AT-renesas.com>, linux-phy-AT-lists.infradead.org, devicetree-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org, linux-clk-AT-vger.kernel.org, linux-renesas-soc-AT-vger.kernel.org, Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj-AT-bp.renesas.com>, Biju Das <biju.das.au-AT-gmail.com> |
| Archive-link: |
| Article |
From: Biju Das <biju.das.jz@bp.renesas.com>
Add device tree binding support for the RZ/G3L (r9a08g046) USB PHY
controller. The RZ/G3L USB PHY block is similar to RZ/G3S, but each port
has an OTG controller, unlike RZ/G3S, which has an OTG controller only on
port 1.
Biju Das (11):
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3L support
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3L PHY bindings
clk: renesas: r9a08g046: Add USB2.0 clock and reset entries
reset: rzg2l-usbphy-ctrl: Introduce info struct for match data
reset: rzg2l-usbphy-ctrl: Add RZ/G3L support
regulator: renesas-usb-vbus-regulator: Introduce helper for regulator
registration
regulator: renesas-usb-vbus-regulator: Add RZ/G3L VBUS regulator
support
phy: renesas: phy-rcar-gen3-usb2: Add RZ/G3L support
phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for
disabled VBUS regulator
arm64: dts: renesas: r9a08g046: Add USB2.0 device nodes
arm64: dts: renesas: r9a08g046l48-smarc: Add USB2.0 support
.../bindings/phy/renesas,usb2-phy.yaml | 2 +
.../reset/renesas,rzg2l-usbphy-ctrl.yaml | 20 +++-
arch/arm64/boot/dts/renesas/r9a08g046.dtsi | 103 ++++++++++++++++++
.../boot/dts/renesas/r9a08g046l48-smarc.dts | 49 +++++++++
drivers/clk/renesas/r9a08g046-cpg.c | 15 +++
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 20 ++--
.../regulator/renesas-usb-vbus-regulator.c | 72 ++++++++++--
drivers/reset/reset-rzg2l-usbphy-ctrl.c | 44 +++++---
8 files changed, 291 insertions(+), 34 deletions(-)
--
2.43.0
