| From: |
| Jose Ignacio Tornos Martinez <jtornosm-AT-redhat.com> |
| To: |
| bhelgaas-AT-google.com, alex-AT-shazbot.org |
| Subject: |
| [PATCH v8 0/3] PCI: Add d3cold and device-specific reset for Qualcomm devices |
| Date: |
| Tue, 09 Jun 2026 18:36:46 +0200 |
| Message-ID: |
| <20260609163649.319755-1-jtornosm@redhat.com> |
| Cc: |
| jjohnson-AT-kernel.org, mani-AT-kernel.org, linux-pci-AT-vger.kernel.org, linux-wireless-AT-vger.kernel.org, ath11k-AT-lists.infradead.org, ath12k-AT-lists.infradead.org, mhi-AT-lists.linux.dev, linux-kernel-AT-vger.kernel.org, Jose Ignacio Tornos Martinez <jtornosm-AT-redhat.com> |
| Archive-link: |
| Article |
Some PCIe devices lack working reset methods for VFIO passthrough scenarios.
These devices typically have no FLR, advertise NoSoftRst+ (blocking PM reset),
and have broken or unavailable bus reset. When a VM crashes, VFIO cannot reset
the device for reuse without a working reset method.
This series addresses the problem by adding general d3cold infrastructure and
device-specific reset for Qualcomm devices:
**Patch 1/3: d3cold reset method**
Adds D3cold as a general reset method with strict _PR3 requirement. Only
attempts true power cycling via platform control (ACPI _PR3), never falls
back to D3hot. This provides genuine power-off reset on platforms that
support it.
**Patch 2/3: device-specific reset for Qualcomm devices**
Adds device-specific reset entries for Qualcomm WCN6855/WCN7850 WiFi cards and
SDX62/SDX65 modems using D3cold power cycling with automatic D3hot fallback.
Uses pci_set_power_state(D3cold) which automatically falls back to D3hot on
platforms without _PR3. Extracts shared pci_dev_d3cold_d0_cycle() helper to
avoid code duplication with general d3cold method. Device-specific reset is
position #1 in reset hierarchy, providing immediate working reset for these
Qualcomm devices.
**Patch 3/3: Qualcomm quirk_no_bus_reset**
Disables broken bus reset for Qualcomm devices. Testing proves this is
device-specific: MediaTek MT7925e works correctly with bus reset using the
same passive M.2-to-PCIe adapters where Qualcomm devices fail, confirming
PERST# is properly wired and the issue is not deployment-specific. Acts as
safety net to prevent broken SBR if users override via sysfs.
v8: Fix commit message in patch 2/3: correct IOMMU handling description
Patches 1/3 and 3/3 unchanged from v7
v7: https://lore.kernel.org/all/20260603105853.326290-1-jtorn...
Jose Ignacio Tornos Martinez (3):
PCI: Add d3cold as general reset method
PCI: Add device-specific reset for Qualcomm devices
PCI: Disable broken bus reset on Qualcomm devices
--
2.53.0