| From: |
| Ziming Zhu <zmzhu0630-AT-163.com> |
| To: |
| Guenter Roeck <linux-AT-roeck-us.net> |
| Subject: |
| [PATCH v2 0/3] Add support for Silergy SQ24860 |
| Date: |
| Fri, 05 Jun 2026 14:30:39 +0800 |
| Message-ID: |
| <20260605063042.91776-1-zmzhu0630@163.com> |
| Cc: |
| Rob Herring <robh-AT-kernel.org>, Krzysztof Kozlowski <krzk+dt-AT-kernel.org>, Conor Dooley <conor+dt-AT-kernel.org>, Jonathan Corbet <corbet-AT-lwn.net>, Shuah Khan <skhan-AT-linuxfoundation.org>, linux-hwmon-AT-vger.kernel.org, devicetree-AT-vger.kernel.org, linux-kernel-AT-vger.kernel.org, linux-doc-AT-vger.kernel.org, Ziming Zhu <ziming.zhu-AT-silergycorp.com> |
| Archive-link: |
| Article |
From: Ziming Zhu <ziming.zhu@silergycorp.com>
Changes in v2:
- Validate silergy,rimon-micro-ohms before programming the current
calibration gain.
- Avoid underflow when programming PMBUS_IIN_OC_FAULT_LIMIT.
- Replace brittle samples limit calculation with SQ24860_MAX_SAMPLES.
- Update the current/power scaling comment to match the implementation.
- Fix the documented DT property name in sq24860.rst.
Ziming Zhu (3):
dt-bindings: hwmon: pmbus: Add bindings for Silergy SQ24860
hwmon: pmbus: Add support for Silergy SQ24860
hwmon: Add documentation for SQ24860
.../bindings/hwmon/pmbus/silergy,sq24860.yaml | 74 +++
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/sq24860.rst | 96 ++++
drivers/hwmon/pmbus/Kconfig | 19 +
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/sq24860.c | 432 ++++++++++++++++++
6 files changed, 623 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/pmbus/silergy,sq24860.yaml
create mode 100644 Documentation/hwmon/sq24860.rst
create mode 100644 drivers/hwmon/pmbus/sq24860.c
--
2.25.1
