| From: |
| Binbin Zhou <zhoubinbin-AT-loongson.cn> |
| To: |
| Binbin Zhou <zhoubb.aaron-AT-gmail.com>, Huacai Chen <chenhuacai-AT-loongson.cn>, Andi Shyti <andi.shyti-AT-kernel.org>, Wolfram Sang <wsa+renesas-AT-sang-engineering.com>, Andy Shevchenko <andy-AT-kernel.org>, linux-i2c-AT-vger.kernel.org |
| Subject: |
| [PATCH v6 0/2] i2c: Add Loongson-2K0300 I2C controller support |
| Date: |
| Fri, 20 Mar 2026 15:25:45 +0800 |
| Message-ID: |
| <cover.1773991081.git.zhoubinbin@loongson.cn> |
| Cc: |
| Huacai Chen <chenhuacai-AT-kernel.org>, Xuerui Wang <kernel-AT-xen0n.name>, loongarch-AT-lists.linux.dev, Binbin Zhou <zhoubinbin-AT-loongson.cn> |
| Archive-link: |
| Article |
Hi all:
This patch set describes the I2C controller integrated the
Loongson-2K0300 chip.
It has a significantly different design from the previous I2C
controller(i2c-ls2x), such as support for master-slave transfer mode,
and DMA transfers (implementation in progress), etc. Therefore, we try
to name it i2c-ls2x-v2.
Thanks.
======
V6:
- Rebase on linux-i2c/i2c-next;
Patch (2/2):
- Update comment;
- Use regmap_get_device();
Link to V5:
https://lore.kernel.org/all/cover.1773142933.git.zhoubinb...
V5:
- Rebase on linux-i2c/i2c-next;
Patch (2/2):
- Add time.h header file;
- Add the `MHz` suffix to `parent_rate` and `freq`;
- Define an iterator within the for loop, with its type being
`unsigned int`;
- Use dev_err_probe() in loongson2_i2c_adjust_bus_speed();
- i2c_adapter_set_node()->device_set_node().
Link to V4:
https://lore.kernel.org/all/cover.1772714348.git.zhoubinb...
V4:
- Rebase on linux-i2c/i2c-next;
Patch (2/2):
- The parent_rate parameter type should be `unsigned long`;
- Drop fallthrough and add missing break;
- device_set_node()->i2c_adapter_set_node();
- Use i2c_parse_fw_timings();
- Use i2c_t.bus_freq_hz instead of priv->speed;
- Sperate loongson2_i2c_handle_read() into loongson2_i2c_handle_read()
and loongson2_i2c_handle_rx_done().
Link to V3:
https://lore.kernel.org/all/cover.1772001073.git.zhoubinb...
V3:
- Rebase on linux-i2c/i2c-next;
Patch (2/2):
- Reorder header file follow IWYU principle;
- Better indentation and coding style;
- Use generic macro definitions;
- Amend *all* struct data types;
- Correct unreasonable variable type definitions;
- Refact loongson2_i2c_isr_error();
- of_property_read_u32()->device_property_read_u32();
- Remove meaningless blank lines and output.
Link to V2:
https://lore.kernel.org/all/cover.1769476820.git.zhoubinb...
V2:
Patch (1/2):
- Add Acked-by tag from Conor, thanks.
Patch (2/2):
- Reorder the definitions of read() and write();
- Adjust the calculation method for bus speed.
Link to V1:
https://lore.kernel.org/all/cover.1763018288.git.zhoubinb...
Binbin Zhou (2):
dt-bindings: i2c: loongson,ls2x: Add ls2k0300-i2c compatible
i2c: ls2x-v2: Add driver for Loongson-2K0300 I2C controller
.../bindings/i2c/loongson,ls2x-i2c.yaml | 4 +
MAINTAINERS | 1 +
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-ls2x-v2.c | 544 ++++++++++++++++++
5 files changed, 560 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-ls2x-v2.c
base-commit: e9b13580b334040da0184a9f32106d808acd7fd5
--
2.52.0
