|| ||Paul Zimmerman <Paul.Zimmerman-HKixBCOQz3hWk0Htik3Jfirstname.lastname@example.org> |
|| ||balbi-l0cyMroinI0@public.gmane.org |
|| ||[PATCH v3 0/5] DWC2 DesignWare HS OTG driver |
|| ||Sat, 9 Feb 2013 19:37:47 -0800|
|| ||gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, gordon.hollingworth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
Paul Zimmerman <Paul.Zimmerman-HKixBCOQz3hWk0Htik3Jemail@example.com>|
|| ||Article, Thread
Here is v3 of the DWC2 patch set, since you kind-of promised to review it
next week ;)
This is a host-mode driver for the Synopsys DesignWare HS OTG controller.
This is the same controller whose peripheral mode is implemented by the
existing s3c-hsotg driver. This controller is also used in host mode in the
Raspberry Pi via a very ugly out-of-tree driver, so merging this would be a
step toward bringing that platform into mainline.
The idea is to add a dwc2/ directory alongside the existing dwc3/ directory,
initially to contain just this host-mode driver. Once that has been accepted
we would then like to move the s3c-hsotg driver into this directory and
integrate it to make a dual-role driver. Finally we will implement support
for the OTG features of the controller.
This driver is still a work in progress, to wit:
- Only a PCI bus interface has been implemented so far. However the core
code and the PCI bus glue code are contained in separate modules, so it
will be easy to add platform driver interfaces in the future. I have
already done that with a platform driver for the Raspberry Pi, but it is
not included here since that platform is out of tree.
- The PCI bus driver has a couple dozen module parameters to control
various optional features of the controller. I realize module parameters
are frowned upon these days, so I would appreciate any advice on the
best way to implement these in an acceptable manner.
- There is no power-management support yet.
- There is some code present to implement DRD and OTG support, but it is
incomplete due to the missing peripheral-mode code.
- There is quite a bit of debug code included. We would like to keep that
until the integration with s3c-hsotg is complete, then most of it can be
Changes since v2 - Fixed a problem with periodic transfers, so hubs, mice
and keyboards work reliably now. Fixed a spurious channel halted interrupt
by disabling the interrupt if the channel is idle.
Changes since v1 - Numerous changes in response to Felipe's review.
Paul Zimmerman (5):
Core files for the DWC2 driver
HCD files for the DWC2 driver
HCD descriptor DMA support for the DWC2 driver
PCI bus interface for the DWC2 driver
Hook the DWC2 driver into the build system
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 2 +
drivers/usb/dwc2/Kconfig | 27 +
drivers/usb/dwc2/Makefile | 15 +
drivers/usb/dwc2/core.c | 2581 +++++++++++++++++++++++++++++++++++
drivers/usb/dwc2/core.h | 600 ++++++++
drivers/usb/dwc2/core_intr.c | 649 +++++++++
drivers/usb/dwc2/hcd.c | 3104 ++++++++++++++++++++++++++++++++++++++++++
drivers/usb/dwc2/hcd.h | 984 +++++++++++++
drivers/usb/dwc2/hcd_ddma.c | 1179 ++++++++++++++++
drivers/usb/dwc2/hcd_intr.c | 2001 +++++++++++++++++++++++++++
drivers/usb/dwc2/hcd_queue.c | 750 ++++++++++
drivers/usb/dwc2/hw.h | 805 +++++++++++
drivers/usb/dwc2/pci.c | 466 +++++++
14 files changed, 13165 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/dwc2/Kconfig
create mode 100644 drivers/usb/dwc2/Makefile
create mode 100644 drivers/usb/dwc2/core.c
create mode 100644 drivers/usb/dwc2/core.h
create mode 100644 drivers/usb/dwc2/core_intr.c
create mode 100644 drivers/usb/dwc2/hcd.c
create mode 100644 drivers/usb/dwc2/hcd.h
create mode 100644 drivers/usb/dwc2/hcd_ddma.c
create mode 100644 drivers/usb/dwc2/hcd_intr.c
create mode 100644 drivers/usb/dwc2/hcd_queue.c
create mode 100644 drivers/usb/dwc2/hw.h
create mode 100644 drivers/usb/dwc2/pci.c
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html