Base support for Freescale i.MX51 SoC platform

This series of patches adds basic support for i.MX5 family to the kernel. The
target device is the i.MX51-based Babbage board (v2.5+) since that is the
hardware I have access to.

This is a result of dropping a lot of functionality from the existing
Freescale codebase that is shipping as part of the Ubuntu ARM enablement. A
lot of the code was refactored to use facilities that were already available
upstream in arch/arm/plat-mxc/. The hope is to get this base port into
mainline and then start working on mainlining the drivers.

With regards to the splitting of the patches, I felt that the following
patchset made it easy to review code. But if this is not acceptable and some
of these patches need to be merged into a single patch, I can do that too.

Regards,
Amit

Amit Kucheria (8):
  arm: mxc: New interrupt controller (TZIC) for i.MX5 family
  arm: mxc: base support for Freescale i.MX51 processor
  arm: mxc: changes to common plat-mxc code to add support for i.MX5
  arm: mxc: Fix Drive Strength Field in the IOMUX controller
  mxc: Add board support for the i.MX51 babbage board
  fec: Add LAN8700 phy support
  fec: Add ARCH_MX5 as a dependency
  arm: mxc: Add imx51_defconfig

Dinh Nguyen (1):
  arm: mxc: Add IO multiplexing support for FEC

Rob Herring (1):
  fec: fix uninitialized rx buffer usage

 arch/arm/Makefile                            |    1 +
 arch/arm/configs/imx51_defconfig             | 1383 ++++++++++++++++++++++++++
 arch/arm/mach-mx5/Kconfig                    |   17 +
 arch/arm/mach-mx5/Makefile                   |    9 +
 arch/arm/mach-mx5/Makefile.boot              |    3 +
 arch/arm/mach-mx5/board-mx51_babbage.c       |  184 ++++
 arch/arm/mach-mx5/clock.c                    |  817 +++++++++++++++
 arch/arm/mach-mx5/cpu.c                      |   46 +
 arch/arm/mach-mx5/crm_regs.h                 |  685 +++++++++++++
 arch/arm/mach-mx5/devices.c                  |   90 ++
 arch/arm/mach-mx5/devices.h                  |    4 +
 arch/arm/mach-mx5/mm.c                       |   86 ++
 arch/arm/plat-mxc/Kconfig                    |   12 +
 arch/arm/plat-mxc/Makefile                   |    9 +-
 arch/arm/plat-mxc/include/mach/common.h      |    3 +
 arch/arm/plat-mxc/include/mach/debug-macro.S |    9 +
 arch/arm/plat-mxc/include/mach/entry-macro.S |   34 +-
 arch/arm/plat-mxc/include/mach/hardware.h    |    4 +
 arch/arm/plat-mxc/include/mach/iomux-mx51.h  |  309 ++++++
 arch/arm/plat-mxc/include/mach/iomux-v3.h    |   16 +-
 arch/arm/plat-mxc/include/mach/irqs.h        |    9 +-
 arch/arm/plat-mxc/include/mach/memory.h      |    3 +
 arch/arm/plat-mxc/include/mach/mx51.h        |  481 +++++++++
 arch/arm/plat-mxc/include/mach/mxc.h         |   13 +
 arch/arm/plat-mxc/include/mach/timex.h       |    2 +
 arch/arm/plat-mxc/time.c                     |   52 +-
 arch/arm/plat-mxc/tzic.c                     |  180 ++++
 drivers/net/Kconfig                          |    3 +-
 drivers/net/fec.c                            |   78 +-
 29 files changed, 4506 insertions(+), 36 deletions(-)
 create mode 100644 arch/arm/configs/imx51_defconfig
 create mode 100644 arch/arm/mach-mx5/Kconfig
 create mode 100644 arch/arm/mach-mx5/Makefile
 create mode 100644 arch/arm/mach-mx5/Makefile.boot
 create mode 100644 arch/arm/mach-mx5/board-mx51_babbage.c
 create mode 100644 arch/arm/mach-mx5/clock.c
 create mode 100644 arch/arm/mach-mx5/cpu.c
 create mode 100644 arch/arm/mach-mx5/crm_regs.h
 create mode 100644 arch/arm/mach-mx5/devices.c
 create mode 100644 arch/arm/mach-mx5/devices.h
 create mode 100644 arch/arm/mach-mx5/mm.c
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx51.h
 create mode 100644 arch/arm/plat-mxc/include/mach/mx51.h
 create mode 100644 arch/arm/plat-mxc/tzic.c

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/