|| ||Nitin Gupta <firstname.lastname@example.org> |
|| ||email@example.com |
|| ||[PATCH 0/4] compcache: compressed in-memory swapping |
|| ||Mon, 24 Aug 2009 10:07:33 +0530|
|| ||firstname.lastname@example.org, email@example.com,
|| ||Article, Thread
Project home: http://compcache.googlecode.com/
It creates RAM based block devices which can be used (only) as swap disks.
Pages swapped to this device are compressed and stored in memory itself. This
is a big win over swapping to slow hard-disk which are typically used as swap
disk. For flash, these suffer from wear-leveling issues when used as swap disk
- so again its helpful. For swapless systems, it allows more apps to run for a
given amount of memory.
It can create multiple ramzswap devices (/dev/ramzswapX, X = 0, 1, 2, ...).
Each of these devices can have separate backing swap (file or disk partition)
which is used when incompressible page is found or memory limit for device is
A separate userspace utility called rzscontrol is used to manage individual
* Testing notes
Tested on x86, x64, ARM
- Cortex-A8 (Beagleboard)
- ARM11 (Android G1)
- OMAP2420 (Nokia N810)
All performance numbers/plots can be found at:
Below is a summary of this data:
- Swap R/W times are reduced from milliseconds (in case of hard disks)
down to microseconds.
- Shows 33% improvement in 'scan' benchmark which allocates given amount
of memory and linearly reads/writes to this region. This benchmark also
exposes *bottlenecks* in ramzswap code (global mutex) due to which this gain
is so small.
- On Linux thin clients, it gives the effect of nearly doubling the amount of
Any workload that has active working set w.r.t. filesystem cache that is
nearly equal to amount of RAM while has minimal anonymous memory requirement,
is expected to suffer maximum loss in performance with ramzswap enabled.
Iozone filesystem benchmark can simulate exactly this kind of workload.
As expected, this test shows performance loss of ~25% with ramzswap.
(Sorry for long patch[2/4] but its now very hard to split it up).
Documentation/blockdev/00-INDEX | 2 +
Documentation/blockdev/ramzswap.txt | 52 ++
drivers/block/Kconfig | 22 +
drivers/block/Makefile | 1 +
drivers/block/ramzswap/Makefile | 2 +
drivers/block/ramzswap/ramzswap.c | 1511 +++++++++++++++++++++++++++++++++
drivers/block/ramzswap/ramzswap.h | 182 ++++
drivers/block/ramzswap/xvmalloc.c | 556 ++++++++++++
drivers/block/ramzswap/xvmalloc.h | 30 +
drivers/block/ramzswap/xvmalloc_int.h | 86 ++
include/linux/ramzswap_ioctl.h | 51 ++
include/linux/swap.h | 5 +
mm/swapfile.c | 33 +
13 files changed, 2533 insertions(+), 0 deletions(-)
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to firstname.lastname@example.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/