Clustered APIC setup for >8 CPU systems

Support for more than 8 CPU non-numa, non-quad based systems. Resend.

Motivation:
The current APIC destination mode ("Flat Logical") used in linux kernel
has an upper limit of 8 CPUs. For more than 8 CPUs, either "Clustered
Logical" or "Physical" mode has to be used.

The attached patch adds support such systems by organizing them into
logical clusters, with each cluster having 4 CPUs. 

The patch is made very simple and isolated, thanks to Martin J. Bligh's
patchsets, which has moved all APIC related functions into sub-arch
macros. Has zero impact on standard systems. 

Please apply.

Thanks,
-Venkatesh

diff -urN linux-2.5.54.mod/arch/i386/Kconfig
linux-2.5.54.patch/arch/i386/Kconfig
--- linux-2.5.54.mod/arch/i386/Kconfig	2003-01-07 19:31:50.000000000
-0800
+++ linux-2.5.54.patch/arch/i386/Kconfig	2003-01-08
15:24:30.000000000 -0800
@@ -75,6 +75,14 @@
 
 	  If you don't have one of these computers, you should say N
here.
 
+config X86_BIGSMP
+	bool "Support for other sub-arch SMP systems with more than 8
CPUs"
+	help
+	  This option is needed for the systems that have more than 8
CPUs
+	  and if the system is not of any sub-arch type above.
+
+	  If you don't have such a system, you should say N here.
+
 # Visual Workstation support is utterly broken.
 # If you want to see it working mail an VW540 to hch@infradead.org 8)
 #config X86_VISWS
diff -urN linux-2.5.54.mod/arch/i386/Makefile
linux-2.5.54.patch/arch/i386/Makefile
--- linux-2.5.54.mod/arch/i386/Makefile	2003-01-01 19:21:44.000000000
-0800
+++ linux-2.5.54.patch/arch/i386/Makefile	2003-01-08
15:24:30.000000000 -0800
@@ -64,6 +64,10 @@
 mflags-$(CONFIG_X86_NUMAQ)	:= -Iinclude/asm-i386/mach-numaq
 mcore-$(CONFIG_X86_NUMAQ)	:= mach-default
 
+# BIGSMP subarch support
+mflags-$(CONFIG_X86_BIGSMP)	:= -Iinclude/asm-i386/mach-bigsmp
+mcore-$(CONFIG_X86_BIGSMP)	:= mach-default
+
 # default subarch .h files
 mflags-y += -Iinclude/asm-i386/mach-default
 
diff -urN linux-2.5.54.mod/include/asm-i386/mach-bigsmp/mach_apic.h
linux-2.5.54.patch/include/asm-i386/mach-bigsmp/mach_apic.h
--- linux-2.5.54.mod/include/asm-i386/mach-bigsmp/mach_apic.h
1969-12-31 16:00:00.000000000 -0800
+++ linux-2.5.54.patch/include/asm-i386/mach-bigsmp/mach_apic.h
2003-01-08 20:19:26.000000000 -0800
@@ -0,0 +1,106 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#define SEQUENTIAL_APICID
+#ifdef SEQUENTIAL_APICID
+#define xapic_phys_to_log_apicid(phys_apic) ( (1ul << ((phys_apic) &
0x3)) |\
+		((phys_apic<<2) & (~0xf)) )
+#elif CLUSTERED_APICID
+#define xapic_phys_to_log_apicid(phys_apic) ( (1ul << ((phys_apic) &
0x3)) |\
+		((phys_apic) & (~0xf)) )
+#endif
+
+#define no_balance_irq (1)
+#define esr_disable (1)
+
+static inline int apic_id_registered(void)
+{
+	        return (1);
+}
+
+#define APIC_DFR_VALUE	(APIC_DFR_CLUSTER)
+#define TARGET_CPUS	((cpu_online_map < 0xf)?cpu_online_map:0xf)
+
+#define APIC_BROADCAST_ID     (0x0f)
+#define check_apicid_used(bitmap, apicid) (0)
+
+static inline unsigned long calculate_ldr(unsigned long old)
+{
+	unsigned long id;
+	id = xapic_phys_to_log_apicid(hard_smp_processor_id());
+	return ((old & ~APIC_LDR_MASK) | SET_APIC_LOGICAL_ID(id));
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+
+	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val = calculate_ldr(val);
+	apic_write_around(APIC_LDR, val);
+}
+
+static inline void clustered_apic_check(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+		"Cluster", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+	return 0;
+}
+
+extern u8 raw_phys_apicid[];
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	return (int) raw_phys_apicid[mps_cpu];
+}
+
+static inline unsigned long apicid_to_cpu_present(int phys_apicid)
+{
+	return (1ul << phys_apicid);
+}
+
+static inline int mpc_apic_id(struct mpc_config_processor *m, int quad)
+{
+	printk("Processor #%d %ld:%ld APIC version %d\n",
+	        m->mpc_apicid,
+	        (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+	        (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+	        m->mpc_apicver);
+	return (m->mpc_apicid);
+}
+
+static inline ulong ioapic_phys_id_map(ulong phys_map)
+{
+	/* For clustered we don't have a good way to do this yet - hack
*/
+	return (0x0F);
+}
+
+#define WAKE_SECONDARY_VIA_INIT
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline int check_phys_apicid_present(int
boot_cpu_physical_apicid)
+{
+	return (1);
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff -urN linux-2.5.54.mod/include/asm-i386/mach-bigsmp/mach_ipi.h
linux-2.5.54.patch/include/asm-i386/mach-bigsmp/mach_ipi.h
--- linux-2.5.54.mod/include/asm-i386/mach-bigsmp/mach_ipi.h
1969-12-31 16:00:00.000000000 -0800
+++ linux-2.5.54.patch/include/asm-i386/mach-bigsmp/mach_ipi.h
2003-01-01 19:21:13.000000000 -0800
@@ -0,0 +1,24 @@
+#ifndef __ASM_MACH_IPI_H
+#define __ASM_MACH_IPI_H
+
+static inline void send_IPI_mask_sequence(int mask, int vector);
+
+static inline void send_IPI_mask(int mask, int vector)
+{
+	send_IPI_mask_sequence(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	unsigned long mask = cpu_online_map & ~(1 <<
smp_processor_id());
+
+	if (mask)
+		send_IPI_mask(mask, vector);
+}
+
+static inline void send_IPI_all(int vector)
+{
+	send_IPI_mask(cpu_online_map, vector);
+}
+
+#endif /* __ASM_MACH_IPI_H */


 <<bigsmp.patch>>