Crash Recovery Kit for Linux 2.6.11.10 (i586) released

Hi,

I want to announce here the availability of the 
Crash Recovery Kit for Linux 2.6.11.10 (i586)
with S.M.A.R.T. monitoring support using smartmontools 5.33 
which also can monitor SATA drives using kernel 2.6.11.10.

See also freshmeat : http://freshmeat.net/releases/196542/

Download is at :
http://crashrecovery.org/CrashRecoveryKit/iso/2.6.11.10/
ftp://ftp.crashrecovery.org/pub/linux/CrashRecoveryKit/is...

HOWTO is at :
http://crashrecovery.org/CrashRecoveryKit/iso/2.6.11.10/H...

Homepage is at : http://crashrecovery.org/

Here's what my Seagate 200Gb SATA drive reports :

		S.M.A.R.T. the smartmontools have been added. The kernel
		has been patched with the 2.6.11-libata-dev1.patch.bz2
		by Jeff Garzik which also makes S.M.A.R.T. monitoring of
		SATA drives possible:

		# smartctl -a -d ata /dev/sdd
smartctl version 5.33 [i586-mandrake-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST3200822AS
Serial Number:    3LJ1P6WG
Firmware Version: 3.01
User Capacity:    200,049,647,616 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Wed May 18 17:25:00 2005 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 ( 430) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 111) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   056   051   006    Pre-fail  Always       -       113663975
  3 Spin_Up_Time            0x0003   096   096   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       29
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   085   060   030    Pre-fail  Always       -       352649124
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       5923
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       33
194 Temperature_Celsius     0x0022   030   048   000    Old_age   Always       -       30
195 Hardware_ECC_Recovered  0x001a   056   049   000    Old_age   Always       -       113663975
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   199   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      5892         -
# 2  Short offline       Completed without error       00%      5892         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Cheers,

Robert
-- 
Robert M. Stockmann - RHCE
Network Engineer - UNIX/Linux Specialist
crashrecovery.org  stock@stokkie.net