|| ||Martins Krikis <firstname.lastname@example.org>|
|| ||email@example.com, firstname.lastname@example.org|
|| ||[Announce] "iswraid" (ICH5R/ICH6R ataraid sub-driver) for 2.4.28-pre3|
|| ||Sat, 9 Oct 2004 13:44:25 -0700 (PDT)|
Version 0.1.4.3 of the Intel Sofware RAID driver (iswraid) is now
available for the 2.4 series kernels at
It is an ataraid "subdriver" but uses the SCSI subsystem to find the
RAID member disks. It depends on the libata library, particularly the
ata_piix driver that enables the Serial ATA capabilities in ICH5/ICH6
chipsets. Hence, for kernels older than 2.4.28, the libata patch by
Jeff Garzik should be applied before applying this patch. There is
more information and some ICH6R related patches at the project's home
page at http://iswraid.sourceforge.net/. The patch applies cleanly to
2.4.28-pre4 as well, and hopefully can be applied to any 2.4 kernel
without too much difficulty.
The changes WRT version 0.1.4 are the following:
* Different buffer_head b_state bit used for IOs submitted
to the mirror.
* Disk sizing problem for disks with odd number of sectors fixed.
* Entering degraded mode with many outstanding IOs fixed.
Please consider this driver for inclusion in the 2.4 kernel tree.
Driver documentation is included in Documentation/iswraid.txt,
which is part of the patch. The license is GPL. I have added
myself to the MAINTAINERS list, please feel free to throw me
out if you don't think I should have done that.
Please let me know if there is anything else I can do to make
this driver acceptable for the 2.4 kernel.
Storage Components Division
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to email@example.com
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/